Henri Édouard Tresca was a French mechanical engineer, and a professor at the Conservatoire National des Arts et Métiers in Paris. He is the father of the field of plasticity, or non-recoverable deformations, which he explored in an extensive series of experiments begun in 1864. He is the discoverer of the Tresca criterion of material failure. The criterion specifies that a material would flow plastically if σ t r e s c a = σ 1 − σ 3 > σ m a x {\displaystyle \ \sigma _{tresca}=\sigma _{1}-\sigma _{3}>\sigma _{max}} Tresca's criterion is one of two main failure criteria used today for ductile materials. The second important criterion is due to von Mises. See comparison on the image left: Tresca's stature as an engineer was such that Gustave Eiffel put his name on number 3 in his list of 72 people making the Eiffel tower in Paris possible. Tresca was also among the designers of the prototype meter bar that served as the first standard of length for the metric system. After the Convention of the Metre had been signed in 1875, the International Bureau of Weights and Measures in Sèvres, France made 28 prototype line standards of platinum-iridium. The bars had a cross section shaped like a modified letter X, designed by Tresca, called the "Tresca section". The Tresca section was designed to provide maximum stiffness. In addition, one surface of the central rib that joined the arms was designed to coincide with the bar's neutral plane, the mathematical plane inside the bar that didn't change length when the bar bent. The two marks near each end of the bar which defined the meter were ruled on this surface. Thus, to first order, the distance between the marks wouldn't change due to the slight sagging of the bar under its own weight between support points. One of the bars was selected as the International Meter. The United States received National Prototype Meters No. 27 and No. 21 in 1890. When the Mendenhall Order in 1893 declared the meter to be the fundamental length standard, No. 27 became the US primary national standard for all length measurements. It remained so until 1960. Tresca was made an honorary member of the American Society of Mechanical Engineers in 1882.

https://en.wikipedia.org/wiki/Henri_Tresca